Engine Assembly Tools

	Engine Stand-Bench Model Code:98001 Price: $35.95 Quantity in Basket: none
Bolts to work bench and allows you to work on your engine at a comfortable height. Rotates 360' for easy assembly of engine.
	Engine Stand- Floor Model Code:98079 Price: $89.95 Quantity in Basket: none
Floor model allow you to work on your engine at a comfortable height. Caster wheels allow the mobility to move your engine around.
	Crank and Flywheel Drill Jig Code:98015 Price: $47.95 Quantity in Basket: none
Use for drilling and adding 4 extra dowel pins to crankshaft and flywheel in the standard SPG pattern.
	Case Boring/Head Flycutting Tool Code:98016 Price: $385.00 Quantity in Basket: none
Use to bore your own cases for larger cylinders or bore and flycut your heads to match. Can be used with drill press, milling machine or hand drill. Stop collar controls the depth of cut. Made of 356 T-6 Aircraft Quality aluminum with 1 1/2" steel shaft. Illustrated instructions and necessary hardware included.
	Tool Holder Code:98041 Price: $26.95 Quantity in Basket: none
Extra tool holder so you can set up cutter for different sizes like stock, 90.5/92, and 94. Saves time by not having to set up the cutter each time you change sizes. (Does not include blade)
	Replacement Cutter Blade Code:98034 Price: $19.95 Quantity in Basket: none
Replacement Components: 1.312" Replacement Cutter-use with #98041 Holder only
	Crankshaft Gear Puller Code:98057 Price: $94.95 Quantity in Basket: none
Use to remove crank/cam timing gear without damage.
	End Play Measuring Tool Code:98086 Price: $19.95 Quantity in Basket: none
Use to measure end play movement of VW crankshaft with feeler gauges. (Not included) All VW, Porsche 912 & 914
	Flywheel Seal Installer Code:98095 Price: $18.95 Quantity in Basket: none
Uses your flywheel bolt to accurately press rear main flywheel seal into engine case. Use with all Type 1,3 VW engines.
	Flywheel Lock Code:98072 Price: $18.95 Quantity in Basket: none
Use to lock flywheel securely in position to loosen or tighten flywheel gland nut and pressure plate bolts For use with 6 volt 109 tooth or 12 volt 130 tooth flywheels.
	Piston Ring Compressor Code:98092 Price: $5.95 Quantity in Basket: none
For use with 83-87mm pistons Tool compresses piston rings using pliers allowing cylinder to be slipped over piston
	Piston Ring Compressor Code:98093 Price: $5.95 Quantity in Basket: none
For use with 88-94mm pistons Tool compresses piston rings, allowing cylinder to be slipped over piston
	Deck Height Measuring Tool Code:98081 Price: $31.95 Quantity in Basket: none
For use with all Type 1-3 VW engines Accurately measures distance from top of cylinder to top of piston with feeler gauge. (Not included)
	Valve Spring Removal Tool Code:6504 Price: $84.95 Quantity in Basket: none
Use on all VW 40HP and later engines Remove valve springs on assembled or disassembled engines. It works on all Type 1, 2, 3, & 4 engines 40hp and later, also on aftermarket heads with stock location rocker shafts.
	Clutch Alignment Tool Code:98056 Price: $3.95 Quantity in Basket: none
For Beetle, Bus, Vanagon, Ghia, Type 3, Porsche Aligns clutch disc with pressure plate and flywheel for ease of proper installation
	Distributor Drive Gear Puller Code:98087 Price: $39.95 Quantity in Basket: none
Aids greatly in removal and installation of distributor drive gear.
	Oil Pump Puller Code:98078 Price: $7.95 Quantity in Basket: none
Helps remove oil pump without damage to pump or engine case.
	Oil Pressure Piston Puller Code:98089 Price: $33.95 Quantity in Basket: none
For use on all VW Type 1-3 engines For simple removal of oil pressure piston from engine case.
	Crankshaft Pulley Puller Code:98058 Price: $27.95 Quantity in Basket: none
Use this puller to remove stock pulleys and aluminum standard size degree and power pulleys with ease.
	Pushrod Measuring Tool Set Code:20204 Price: $21.95 Quantity in Basket: none
Tool designed to get exact measurements for custom pushrod applications Full size pads fit beneath and support rocker arm blocks and are used to obtain correct rocker arm geometry Measuring tool plus selection of three (3) thicknesses of rocker pads .015"/38mm, .030"/76mm, .060"/1.52mm
	Pushrod Measuring Tool Only Code:98094 Price: $16.95 Quantity in Basket: none
Tool designed to get exact measurements for custom pushrod applications Without measuring pads
	Axle Nut Removal Tool 36mm Code:98083 Price: $15.95 Quantity in Basket: none
For use in removal of rear axle nut. For use with 1/2" breaker bar (not included) 36mm.
	Axle Nut Removal Tool 46mm Code:98084 Price: $19.95 Quantity in Basket: none
For use in removal of rear axle nut. For use with 1/2" breaker bar (not included) 46mm.
	Adjustable Pushrod Tool Code:1664 Price: $16.95 Quantity in Basket: none
Set up your pushrod length right the first time!
	12 Pt. CV Joint Socket Code:6511 Price: $14.95 Quantity in Basket: none
Use this tool to remove and install VW and Porsche rear CV joints.
	Wrist Pin Tool Code:6551 Price: $10.95 Quantity in Basket: none
For removing and installing piston pins through connecting rods without damaging the bushing.
	Transmission Drain/Fill Plug Tool Code:6517 Price: $8.95 Quantity in Basket: none
Fits 17mm, 3/8 rachet
	Cylinder Head CC Measuring Code:6525 Price: $18.95 Quantity in Basket: none
A must have for the serious race engine builder.
	Clutch Cable Wing Nut Adjustment Tool Code:6569 Price: $9.95 Quantity in Basket: none
Make that clutch cable adjustment easier with this tool.
	Oil Filler & Breather Nut Tool Code:6509 Price: $11.95 Quantity in Basket: none
	Economy Engine Stand Code:AC000115 Price: $79.95 Quantity in Basket: none
Bolt together
	6 Inch Electronic Digital Calipers Code:6EDC Price: $56.95 Quantity in Basket: none
Extra large digital display precisely indicates O.D. and I.D. measurements in inches and millimeters. Can also be used for precise depth measurement to 6". Converts metric measurements to inch and inch to metric in just a flash. No fumbling with conversion tables, just indicate the required measurement, press a button and view the conversion on the extra large display screen. Powered by a G13-A micro cell. Shipped with sturdy foam lined instrument case and two long life power cells.